- Welcome to ArimaOwners.com.
News:
Welcome to the largest gathering of Arima boat owners anywhere. We are a forum based gathering of Arima Boat enthusiasts that like to pleasure cruise, fish, camp, and hunt. While Arimas are centered in the PNW, we have members across the globe. It is 3/4's water after all. Lurk, join up, and post about your Arima upgrades, family trips, and of course, your fishing exploits. Just remember to add photos whenever possible.
| Gallery Name | Total Images | |
|---|---|---|
| My Arima Pics Pics of my 1981 Sea Hunter | 4 | |
| Misc Pics | 3 | |
| New Motor and Electronics Upgrade Aug '22 | 30 | |
| Add New Companion Seat Pics from removing the Passenger (port) pedestal seat and add a new companion seat box from Defiance. | 19 | |
| Panther Adapter Had to get creative in to make my Panther Tie-Bar work with hydraulic steering. | 37 | |
| Window Leak Repair/Re-seal Had a bad leak in my window, particularly the lower corner of the port side. | 13 | |
| Extra Gas Can Storage Against some advice on this forum, I added a portable gas can in the front of the cuddy. I have it strapped down. I made cleats out of Starboard that fit into the grooves on the bottom of the plastic gas can. This helps even further to limit movement of the can. These cleats will effectively keep the can from moving side-to-side and back-and-forth. The strap will mainly be needed to keep the can from moving up and down. However, with the very limited space in the cuddy, there isn't really room for up and down movement anyway. We'll see how this works out. | 5 | |
| Pics of my railings These were custom railings. They were installed by a previous owner at some time in the boat's history. | 5 | |
| Bilge Pump Access and Upgrade Adding an access port to the aft bilge area (back of fish box). Upgrading existing pump to 1100gph. Moving existing pump to forward bilge area (and cutting new access). | 18 | |
| Name My Sea Hunter finally got it's name!! | 1 | |
| New Canvas My lovely wife does upholstery and has the equipment to sew canvas. She's making a new canvas for my SH. | 6 | |
| Refinish Wood | 5 | |
| Upgrade/Add New Dash Switches I finally got rid of the 43-year old factory-original switches as well as a couple that I had jerry-rigged. Replaced with new Blue Seas switches. Added a few new switches to run a second bilge pump, shut off my stereo, and run some new cabin rope lights. | 20 | |
| (Temporary) Removal of my Front Railings | 2 | |
| Deck Hatch Finger Holes Decided to get rid of the hokey carriage bolts that were often hard to grap/grip to lift. Replaced with drain tubes cut to fit and flared in place. Now I can just stick my finger in the hole and lift. | 11 | |
| New Wash-down Pump/Hose Initial pics are planning/concept. The rest are pics of the actual project including photos of the parts bought/used. | 30 |
| View Users Galleries |
Powered by SMF Gallery Pro