Author Topic: 1/4 sheet Starboard ? Electrical Upgrade  (Read 1807 times)

0 Members and 1 Guest are viewing this topic.

Offline GregE

1/4 sheet Starboard ? Electrical Upgrade
« on: January 09, 2015, 02:08:26 PM »
Working to get my L storage seat 'battery box' redone replacing most of the plywood.  Just got a Marinco battery minder and it's time to get it done.

 I don't want to need to buy a full or even half sheet so if you have even  some 12" pieces above your forecast need......  PM please.   :arms:

« Last Edit: January 09, 2015, 06:34:33 PM by GregE »
Greg
Osprey 26 LC Kodak;  Arima SR 19 HT; SL 22 Honda 225
http://www.sagecreekforums.com/phpforum/index.php
Sold:  Arima SE 16 WeeBait; SH 15 WeeBoat;
SR 21 NoBait;  SL 22 ReBait

Offline Hydroman

Re: 1/4 sheet Starboard Needed
« Reply #1 on: January 09, 2015, 02:46:33 PM »
Greg,


  There is a place on West Valley Hwy in Kent, Wa that has a good selection of odd sizes and colors that are scraps from special orders that they have sold.  The last time I was in there I picked up some to build new bait table for my TJ.

Jim

Offline Markshoreline

Re: 1/4 sheet Starboard Needed
« Reply #2 on: January 09, 2015, 03:38:36 PM »
Also TAP Plastics carries scraps that are a bargain and sold by the pound!
2002 Sea Ranger HT 21, Yamaha 150, Yamaha 9.9

Offline Croaker Stroker

Re: 1/4 sheet Starboard Needed
« Reply #3 on: January 09, 2015, 04:20:23 PM »

EBAY
1987 - 17' Sea Pacer - 2004 Evinrude 90 E-tec
15' Sea Sprinter - **SOLD**

"If a fish will, he will… if he won't, he won't… and that's about it… except… he may take this when he won't take that."

Offline StreamFixer

  • Administrator
  • Fisherman
  • *****
  • Posts: 8624
  • Have Rod, Will Travel
  • View Gallery
    • StreamFix
Re: 1/4 sheet Starboard Needed
« Reply #4 on: January 09, 2015, 05:28:26 PM »
TAP will custom cut for a nominal fee...  Well worth it IMHO.

StreamFixer
'97 19SC w/ Salt Boss Top
'03 Yamaha 115 EFI
'05 Yamaha T8 Solas 4 blade prop

"By the grace of God we travel upon the rivers and sea..
They, like He, are mightier than me."  Mike Jesperson aka 'Nalu'

Offline GregE

Re: 1/4 sheet Starboard Needed
« Reply #5 on: January 09, 2015, 06:00:01 PM »
Checking them, thanks
Here's the electrical upgrade phase 1.  The white duplex wiring in the top pic ran forward and back with no plan.  ACR added, Main distro in back and another in the cuddy.





And the before and after of the rear station



« Last Edit: January 09, 2015, 06:08:06 PM by GregE »
Greg
Osprey 26 LC Kodak;  Arima SR 19 HT; SL 22 Honda 225
http://www.sagecreekforums.com/phpforum/index.php
Sold:  Arima SE 16 WeeBait; SH 15 WeeBoat;
SR 21 NoBait;  SL 22 ReBait

Offline t2shortb

Re: 1/4 sheet Starboard ? Electrical Upgrade
« Reply #6 on: January 11, 2015, 12:54:18 AM »
Greg,
Give me a ring! I've got you covered.
Women want me.... Fish fear me......
86 17SC  "Krippled Mullet"
2012 ETEC 115
2006/2003 Yamaha F8/F6 Frankin-clash (dont ask)

Offline headduck

Re: 1/4 sheet Starboard ? Electrical Upgrade
« Reply #7 on: January 13, 2015, 05:55:43 PM »
Mounting the components on the Starboard is a great idea.
1987 17' Sea Ranger 2015 Mercury 115 2012 Evinrude 9.8

Offline StreamFixer

  • Administrator
  • Fisherman
  • *****
  • Posts: 8624
  • Have Rod, Will Travel
  • View Gallery
    • StreamFix
Re: 1/4 sheet Starboard ? Electrical Upgrade
« Reply #8 on: January 13, 2015, 07:35:42 PM »
Just remember to always attache to soarboard using mechanical devices (screws polts and the linke ---  because NO ADHESIVE STICKS TO STARBOARD....  if an adhesive maker tells you their stuff will stick to starboard --THEY ARE LYING TO YOU....

StreamFixer
'97 19SC w/ Salt Boss Top
'03 Yamaha 115 EFI
'05 Yamaha T8 Solas 4 blade prop

"By the grace of God we travel upon the rivers and sea..
They, like He, are mightier than me."  Mike Jesperson aka 'Nalu'

Offline Croaker Stroker

Re: 1/4 sheet Starboard ? Electrical Upgrade
« Reply #9 on: January 13, 2015, 08:38:36 PM »
Just remember to always attache to soarboard using mechanical devices (screws polts and the linke ---  because NO ADHESIVE STICKS TO STARBOARD....  if an adhesive maker tells you their stuff will stick to starboard --THEY ARE LYING TO YOU....

StreamFixer

+1

Soarboard... attache with polts and linke.   :whistle:
1987 - 17' Sea Pacer - 2004 Evinrude 90 E-tec
15' Sea Sprinter - **SOLD**

"If a fish will, he will… if he won't, he won't… and that's about it… except… he may take this when he won't take that."

Offline Markshoreline

Re: 1/4 sheet Starboard ? Electrical Upgrade
« Reply #10 on: January 13, 2015, 08:45:30 PM »
Das gut avice!
2002 Sea Ranger HT 21, Yamaha 150, Yamaha 9.9

Offline GregE

Re: 1/4 sheet Starboard ? Electrical Upgrade
« Reply #11 on: January 13, 2015, 08:46:35 PM »
Hey, cut him some slack- his Ducks got whipped...   :wink:
Greg
Osprey 26 LC Kodak;  Arima SR 19 HT; SL 22 Honda 225
http://www.sagecreekforums.com/phpforum/index.php
Sold:  Arima SE 16 WeeBait; SH 15 WeeBoat;
SR 21 NoBait;  SL 22 ReBait

Offline StreamFixer

  • Administrator
  • Fisherman
  • *****
  • Posts: 8624
  • Have Rod, Will Travel
  • View Gallery
    • StreamFix
Re: 1/4 sheet Starboard ? Electrical Upgrade
« Reply #12 on: January 14, 2015, 08:01:05 AM »
No, they got whupped....  and did they ever....  4 turnovers and Ohio still won by 22.....   :doh:

StreamFixer
'97 19SC w/ Salt Boss Top
'03 Yamaha 115 EFI
'05 Yamaha T8 Solas 4 blade prop

"By the grace of God we travel upon the rivers and sea..
They, like He, are mightier than me."  Mike Jesperson aka 'Nalu'