News:

Welcome to the largest gathering of Arima boat owners anywhere. We are a forum based gathering of Arima Boat enthusiasts that like to pleasure cruise, fish, camp, and hunt. While Arimas are centered in the PNW, we have members across the globe. It is 3/4's water after all. Lurk, join up, and post about your Arima upgrades, family trips, and of course, your fishing exploits. Just remember to add photos whenever possible.

Main Menu

Honda 90HP flush port leaking water

Started by rp2000r, April 17, 2024, 11:18:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

rp2000r

April 17, 2024, 11:18:20 PM
I am finally back in a Arima and was running the motor on muffs today and noticed the flush port connection was leaking water as the motor ran.
I removed the screw where the hose connects and my 2006/07 motor didn't have a spring. I also checked thermostat which was operating fine. Motor has 154 hours and looks new inside and out.

It seems this is a common issues what's the best fix?

Tj805

#1
April 18, 2024, 06:18:42 AM
All the flush ports I have seen have a gasket on the inside of them , that the hose runs up to . Was yours missing that gasket ?
2000 sea chaser 19
Honda 130
2014 yamaha f8

rp2000r

#2
April 18, 2024, 11:53:34 AM
Mine has the gasket but I think it's missing the spring part of the valve if my motor has one. I keep reading conflicting info.
Print
Go Up Pages1
User actions