Cup holders

[Diablo]

I have 4 stock cup holders. Two in front at each seat and two in the motor well corners my 17 had the same amount. I noticed in Tesoro bait table post he did not have cup holders in the corners of the motor well on a 21.

A friend has a Trophy and there was no where to put your beer, water, coffee when working your gear. I mean nowhere! I always thought that was a plus for Arima they came with 4 cup holders.

OK, my question, when did Arima stop putting in cup holders. 

[Danno]

....there was no where to put your beer...

Blasphemy!

[Diablo]

....there was no where to put your beer...

Blasphemy!

You have got to stay hydrated. And beer is proof God loves us.

[Fisherdv]

No rear cup holders on my 2018 16SC. It does have 2 up front. I also got a Scottys cup holder that will fit into any rod holder base. I have a total of 6 Scottys rod holder bases so I can take my beer wherever I happen to be 

[BayWolf]

...there was no where to put your beer, water, coffee when working your gear.

Never needed two hands to "work my gear".  Now I'm wondering what I missed out on?   

[DevMah]

My 2015 has two up front and two in the optional bait table .

Dev

[disposable]

My 2015 has two up front and two in the optional bait table .

Dev

same

[Danno]

My 2015 has two of the fold away types near the knees of both helm seats and two cut into the bait table.

They used to put the ones that are similar to the bait table holder into the dash horizontal surfaces on either side but I think they stopped that around 2010.

[christianbrat]

my 89 SE 16 has 2 in the rear and 2 up front. i use all of them + added a 2nd at the helm

[Salmon Hobo]

Of course if you have a rocket launcher on the roof of your boat I find you get a great tequila or rum shot glass holder tray on the roof...you have 6 more spots for drinks!! Thanks Arima!

[agoodhi]

My 04 SR17 doesn't have cup holders on motor well.  They are on the removable tray.  I added a scotty cup to my rail cuz I don't like using the built in folding ones.

I'm thinking of adding scotty flush mounts on motor well.  That would give me more beer holders and could deploy rods out the middle if needed.

[Fisherdv]

My 04 SR17 doesn't have cup holders on motor well.  They are on the removable tray.  I added a scotty cup to my rail cuz I don't like using the built in folding ones.

I'm thinking of adding scotty flush mounts on motor well.  That would give me more beer holders and could deploy rods out the middle if needed.

I did just that......added two Scottys flush mount bases on the motor well. Very good spot for them.

[Pdxmgunner]

Such a disappointment, the loss of the CH.

[fishmeister]

Guess I'm lucky to have one of the early versions.  I've got 2 up front and 2 in the back.  When combined with the 2 that are in the lid of my cooler, I'm never that far from a hydration source.

[Hunter]

I have a nice array of built-in drink holders on my tin can but still needed to add a few so went with these from Miller Marine.   Very well made from 100% Starboard and look good.   The attachment bases are low profile and use a dovetail notch so the actual holder just slides down onto the base and is 100% secure.  I'd say the bases are about 1.5in by 3in by 3/4 in Starboard.   When I don't have passengers the holders will just pull up and off and go into one of the storage trays..    The Miller Marine Rail system is also great for adding rod holders, tool/knife holders, bait tables, etc....

[Captainwraith]

One of my 4 cup holders disappeared on the ride home yesterday.  Does anyone know who makes them? Would like another one to drop back in.  I don't see any on the arima site.

[disposable]

I always try to replace plastic with stainless when needed. These were a perfect swap out when my bait table ones came loose (though I seated them in silicone cuz the adhesive ring was weak)

Amarine Made 2pcs Stainless Steel Cup Drink Holder with Drain Marine Boat Rv Camper https://www.amazon.com/dp/B009DCGT74/

[Captainwraith]

sweet. thanks i will order them on my next amazon order.