Author Topic: SeaDek install  (Read 1534 times)

0 Members and 1 Guest are viewing this topic.

Offline BestBoats

SeaDek install
« on: April 03, 2017, 05:29:09 PM »
I picked up two big sheets of SeaDek on Black Friday. Finally got them installed now that the sun came out. It cuts nice and is easy to work with. Took me about 3 hours to make the patterns and 1.5 hours to install.
Two sheets will do a full 21ht plus steps and gunels with some extra. I am very impressed with the product. Very good grip and way more comfortable to stand on. I think it will help with noise and vibration too. Time will tell but it appears to be a great product as in doing research it's hard to find a negative review.



2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI

Offline tc808

Re: SeaDek install
« Reply #1 on: April 03, 2017, 05:48:40 PM »
Looks great!

Offline Diablo

Re: SeaDek install
« Reply #2 on: April 03, 2017, 06:23:07 PM »
Very nice. Good spot for the ruler.  :applause:
'98 19SR  '15 E Tec 115, '10 Honda 8
'88 17SR  '90 Johnson 90, Honda 8, SOLD

Offline dbhazjack

Re: SeaDek install
« Reply #3 on: April 03, 2017, 07:01:47 PM »
That is gorgeous. So jealous  :applause:
2012 17' Sea Chaser, 90 hp Honda, 8 hp Honda Kicker.

Offline gfakkema

Re: SeaDek install
« Reply #4 on: April 03, 2017, 07:25:34 PM »
That looks amazing!  :applause: When should I drop my boat off?  :rimshot:
2001 22' Sea Legend HT w/Alaskan Bulkhead
2006 Suzuki DF250 / 2004 Mercury 9.9

Online Markshoreline

Re: SeaDek install
« Reply #5 on: April 03, 2017, 09:41:22 PM »
Does it come in colors?
2002 Sea Ranger HT 21, Yamaha 150, Yamaha 9.9

Offline BestBoats

Re: SeaDek install
« Reply #6 on: April 03, 2017, 10:40:40 PM »
Does it come in colors?

21 colors...SeaDek.com
2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI

Online Markshoreline

Re: SeaDek install
« Reply #7 on: April 04, 2017, 07:43:39 AM »
Very nice install with all the lines parallel!
2002 Sea Ranger HT 21, Yamaha 150, Yamaha 9.9

Online Yachter Yat

Re: SeaDek install
« Reply #8 on: April 04, 2017, 02:40:00 PM »
    Looks nice, but I must say, if you boat in bare feet (like I always do), you'd be "dancing" when the sun got to it.  Definitely have to opt for a lighter color.   

Yat
Dear Arima:  Please "square-off" the Hunter transom. Next, stretch the Explorer by 9 and steal 2 or 3 from the cabin.  Please hurry, I'm getting old.

16 SC/Honda 60

Offline BestBoats

Re: SeaDek install
« Reply #9 on: April 04, 2017, 03:51:27 PM »
    Looks nice, but I must say, if you boat in bare feet (like I always do), you'd be "dancing" when the sun got to it.  Definitely have to opt for a lighter color.   

Yat
According to the reviews even the dark colors don't get too hot for bare feet. Not that I have to worry about it up here in the PNW anyway lol.
2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI

Offline BestBoats

Re: SeaDek install
« Reply #10 on: April 04, 2017, 03:54:53 PM »
Took the boat out on the Columbia today to try and find a chinook in the mud. No luck on the fish but I can't believe how much sound and vibration that the SeaDek took out of my boat. I was blown away...thought it would help but not nearly as much as it did. Super impressed.
2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI

Offline OnA

Re: SeaDek install
« Reply #11 on: April 04, 2017, 04:46:13 PM »
How well does it clean up?

Offline BestBoats

Re: SeaDek install
« Reply #12 on: April 04, 2017, 06:03:56 PM »
How well does it clean up?
Haven't gotten it dirty or bloody yet. They say it cleans as well as the deck...I would guess it will clean well based on the feel of the material. The reviews from saltwater fishing guides are all positive on the cleanup. I will keep this thread posted if I run into any issues with the product. I hope to put it through some heavy use this summer.
2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI

Online First Cabin

Re: SeaDek install
« Reply #13 on: April 04, 2017, 07:21:39 PM »
Looks fantastic!

How thick is it?  Can you catch an edge and trip? I look forward to seeing how it holds up.  I've been looking at doing this too.
First:  1982 15' SeaHunter, Yamaha 70 2-stroke, Yamaha F6
Second:  1987 17' SeaRanger, Merc 90 2-stroke, Yamaha F8
Current:  2002 17' SeaChaser, Yamaha F100, Yamaha T8

Offline Tunacious

Re: SeaDek install
« Reply #14 on: April 04, 2017, 08:04:22 PM »
Brett,
That looks awesome.  I just came across your post and had to double check to make sure that was your boat.

I bet that is going to work out really good for you.

I want to see a photo of that same deck with tuna blood all over it.  :beerchug:
2003 Sea Ranger 21' HT
2003 130 Honda

Offline BestBoats

Re: SeaDek install
« Reply #15 on: April 04, 2017, 08:22:14 PM »
Looks fantastic!

How thick is it?  Can you catch an edge and trip? I look forward to seeing how it holds up.  I've been looking at doing this too.
Thanks! No trip points. Feel free to shoot me a PM if you want to swing by if you want to put eyes on it and walk on it to help you decide.
2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI

Offline BestBoats

Re: SeaDek install
« Reply #16 on: April 04, 2017, 08:24:30 PM »
Brett,
That looks awesome.  I just came across your post and had to double check to make sure that was your boat.

I bet that is going to work out really good for you.

I want to see a photo of that same deck with tuna blood all over it.  :beerchug:
Thanks Walt! Hope to spill gallons of Tuna blood on it this summer and put it to the test!  :beerchug:
2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI

Offline wedocq

Re: SeaDek install
« Reply #17 on: April 05, 2017, 12:26:54 AM »
That looks AWESOME! Did you happen to save the patterns you made?  :whistle: :biggrin:
-Shawn
2002 21' Arima Sea Ranger HT  Suzuki DF175 4-stroke.
WEDOCQ= WE DO SEKIU! It pays homage to my Uncle Jay who died of cancer.

Offline BestBoats

Re: SeaDek install
« Reply #18 on: April 05, 2017, 07:42:51 AM »
That looks AWESOME! Did you happen to save the patterns you made?  :whistle: :biggrin:
-Shawn
Thanks! No I tossed them....it didn't take long to make them. For ourboats two sheets of the 77x39 does the whole job plus. You may need it now with that 175 so all your crew dosnt  slide to the back when you juice it!
2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI

Offline Old No7

  • Coho
  • ***
  • Posts: 246
  • Arima Sea Ranger 19' ~ Honda BF130 4-Stroke
  • View Gallery
Re: SeaDek install
« Reply #19 on: April 05, 2017, 08:10:17 AM »
Look great!!!

Just a few questions about the installation please...

* What can you tell us about the adhesive or glue used for install?

* With patterns of that size, any issues getting it "perfectly straight" before the adhesive sets up?

* And what's the expected fix if a corner ever lifts?

Thanks in advance for your help, as others may be interested in this sticky subject too.  :wink:

Old No7
"A bad day on an Arima, is better than a good day at work!"

Offline Diablo

Re: SeaDek install
« Reply #20 on: April 05, 2017, 09:59:01 AM »
Look great!!!

Just a few questions about the installation please...

* What can you tell us about the adhesive or glue used for install?

* With patterns of that size, any issues getting it "perfectly straight" before the adhesive sets up?

* And what's the expected fix if a corner ever lifts?

Thanks in advance for your help, as others may be interested in this sticky subject too.  :wink:

Old No7

I can answer that. I've used for my Arima consol an now using it on another boat. Great stuff.

It's peel and stick. The instructions say cut the backing without cutting the foam half the longest length. Place it where it goes, tape it so it doesn't move. Then fold back half an remove the backing and roll in in place. Repeat for other half. Like doing a big vinyl decal.

'98 19SR  '15 E Tec 115, '10 Honda 8
'88 17SR  '90 Johnson 90, Honda 8, SOLD

Offline ATGEP

Re: SeaDek install
« Reply #21 on: April 05, 2017, 11:16:58 AM »
Where did you purchase it and was the sale price much cheaper than normal?

Offline wedocq

Re: SeaDek install
« Reply #22 on: April 05, 2017, 01:52:30 PM »
I ordered some samples to check out the product!

http://www.seadek.com/blog/sample-request-form/
2002 21' Arima Sea Ranger HT  Suzuki DF175 4-stroke.
WEDOCQ= WE DO SEKIU! It pays homage to my Uncle Jay who died of cancer.

Online Markshoreline

Re: SeaDek install
« Reply #23 on: April 05, 2017, 02:21:30 PM »
I did too, thanks for the link, Shawn.
2002 Sea Ranger HT 21, Yamaha 150, Yamaha 9.9

Offline BestBoats

Re: SeaDek install
« Reply #24 on: April 05, 2017, 11:07:39 PM »
Where did you purchase it and was the sale price much cheaper than normal?
I ordered it from their website. Looks like Shawn posted the link. I picked it up on their Black Friday sale for 50% off. It cost me $150 to do the whole boat plus 20 for the fish tape measure. I was debating giving this product a go then when that sale came up I couldn't pass it up. Normal price is $150 per sheet.

« Last Edit: April 05, 2017, 11:10:51 PM by BestBoats »
2007 21' Sea Ranger Hardtop "THE A-TEAM"
150 Evinrude Etec
9.9 Susuki EFI