Author Topic: Dive ladder  (Read 758 times)

0 Members and 1 Guest are viewing this topic.

Online Chief of the Boat

Dive ladder
« on: January 24, 2017, 06:17:15 AM »
This 21 Skip Tower is going to Guam with this cool Garelick Dive Ladder Don installed using the factory kicker bracket bolts.
http://www.garelick.com/Gull-Wing-Step-Ladder-Stainless-Steel-Frame


The cardboard template in the first photo is where the motor well will get cut to accommodate the hydraulic ram when the twin Yamaha F-70's turn.
1994 Sea Explorer 1511 loves whitecaps 2010 Yamaha F-70 2012 Yamaha F-8 with a  Fixed SaltBoss Bracket Lowrance HDS-5 & 7 Gen 2 Standard Horizon Fixed VHF 2150 with AIS

Offline Markshoreline

Re: Dive ladder
« Reply #1 on: January 24, 2017, 07:01:54 AM »
Does the ladder slip out of the bracket when not deployed?  I have a Garelick ladder that I adapted to the bow for beach landings.
2002 Sea Ranger HT 21, Yamaha 150, Yamaha 9.9

Online Chief of the Boat

Re: Dive ladder
« Reply #2 on: January 24, 2017, 07:15:11 AM »
Mark it does.
1994 Sea Explorer 1511 loves whitecaps 2010 Yamaha F-70 2012 Yamaha F-8 with a  Fixed SaltBoss Bracket Lowrance HDS-5 & 7 Gen 2 Standard Horizon Fixed VHF 2150 with AIS

Offline Markshoreline

Re: Dive ladder
« Reply #3 on: January 24, 2017, 10:03:00 AM »
Here's a different model Garelick mounted on the bow.
2002 Sea Ranger HT 21, Yamaha 150, Yamaha 9.9

Offline Mile2885

Re: Dive ladder
« Reply #4 on: January 25, 2017, 10:33:26 AM »
I need one of those!  Any way to work it in with an anchor pulpit in place?

Offline Markshoreline

Re: Dive ladder
« Reply #5 on: January 25, 2017, 12:29:59 PM »
I think so- you'd need to get another slot device to slide into the receiver on the boat.  Then fab up a bracket that would attach to the slot device and hold the anchor roller.
2002 Sea Ranger HT 21, Yamaha 150, Yamaha 9.9