Welcome to the largest gathering of ARIMA boat owners anywhere. We are a forum based gathering of Arima Boat enthusiasts that like to pleasure cruise, fish, camp, and hunt. While Arimas are centered in the PNW, we have members across the globe. It is 3/4's water after all. Lurk, join up, and post about your Arima upgrades, family trips, and of course, your fishing exploits. Just remember to add photos whenever possible.
Download Item |
||||
Previous Image | Next Image | ||||
Description: The West Systems resin with hardner is 5 parts resin-to 1 part hardner ratio by weight. I have a small West Systems digital scale for getting that right. Then add West Systems colloidal silica which looks like fine white snow. It is mixed in until the shown thickness is reached. Note the DQ swirl in the mix. The thickness is important and you should be able to peak up the mix and it should hold. If not, add more silica. Another very small batch of resin with hardner is also standing by. This is used to wet out the holes before the filler mix is put in. Cure for 24 hours until rock hard.
Stats: Views: 1317 Filesize: 12.59kB Height: 375 Width: 500 Keywords: trim tabs Posted by: Techdiver1 March 22, 2011, 03:51:43 AM Total Likes: 0 Image Linking Codes
|